Chinese Automated Driving Standards

From NewlyPossible.org
Revision as of 10:38, 9 October 2026 by Neumoeglich (talk | contribs)

Official link. SAMR/SAC (project record)

Plan no. 20264153-T-469 [introduction and organization of automated vehicles]

Smart community infrastructures—Smart transportation—Guidelines for the introduction and organization of autonomous vehicles

《智慧城市基础设施 智慧交通 自动驾驶车辆引入和组织指南》

Issuing authority. Administered through TC567; competent department is SAC.

Summary. Planned recommended national standard providing guidance for the introduction and organization of automated vehicles within smart-transport and smart-community infrastructure. The project was assigned 30 July 2026 with a 10-month project cycle and is currently being drafted (正在起草). The project modifies ISO 37181:2022. The principal drafting organizations identified by SAMR/SAC are the Shandong Expressway Group Innovation Research Institute and the China National Institute of Standardization. On 8 Sept 2026, the TC567 secretariat separately opened recruitment for additional drafting organizations and experts.

Official link. SAMR/SAC (project record); CNIS (drafting-participation notice)

Plan no. 20253394-T-339 [software-update engineering]

Road vehicles—Software update engineering

《道路车辆 软件升级工程》

Issuing authority. Administered by MIIT through TC114/SC34; to be issued by SAMR and SAC.

Summary. Planned recommended national standard specifying requirements and recommendations for road-vehicle software-update engineering at both organizational and project levels. It applies to software-updatable road vehicles and addresses vehicles, vehicle systems, electronic control units, infrastructure, and the assembly and deployment of update packages after initial development, as well as organizations participating in vehicle software-update engineering.

The project modifies ISO 24089:2023 and ISO 24089:2023/Amd 1:2024. Plan no. 20253394-T-339 was assigned 6 Aug 2025 with a 12-month project cycle. MIIT published the approval draft for comment on 23 Sept 2026, with comments accepted from 24 through 30 Sept 2026. The current SAMR/SAC record shows the project in the approval stage (正在批准) and proposes implementation six months after publication. It would provide a lifecycle engineering layer complementary to mandatory GB 44496-2024 and GB/T 47325-2026.

Official link. SAMR/SAC (current project record); MIIT (approval-draft consultation)

Plan no. 20264866-T-339 [vehicle software identification number]

Vehicle software identification number

《汽车软件识别码》

Issuing authority. Administered by MIIT through TC114/SC34; to be issued by SAMR and SAC.

Summary. Planned recommended national standard specifying the content and composition of a vehicle software identification number, process management, and vehicle requirements. It applies to M- and N-category vehicles using the software identification number. The project was formally assigned 30 Sept 2026 with a 15-month project cycle and is currently being drafted (正在起草). It is relevant to the software-update, configuration-management, cybersecurity, and post-production compliance framework for software-defined and automated vehicles.

Official link. SAMR/SAC (current project record)

Plan no. 20264477-T-339 [user notification and training]

Intelligent and connected vehicle—User notification and training requirements for driving automation functions

《智能网联汽车 驾驶自动化功能用户告知及培训要求》

Summary. Planned national standard on notifying and training users of driving-automation systems, expressly covering M- and N-category vehicles with combined driver assistance and with L3/L4 automated driving. Formally assigned 28 Aug 2026 with a 15-month project cycle; currently being drafted.

Official link. SAMR/SAC (project record search)

Plan no. 20264505-T-339 [ADS functional safety and SOTIF]

Intelligent and connected vehicle—Functional safety and safety of the intended functionality technical requirements for driving automation system—Part 2: Automated driving system

《智能网联汽车 驾驶自动化系统功能安全和预期功能安全技术要求 第2部分:自动驾驶系统》

Summary. Planned recommended national standard specifically addressing functional safety and SOTIF for automated driving systems on M- and N-category vehicles; formally assigned 28 Aug 2026 with a 15-month project cycle; currently being drafted.

Official link. SAMR/SAC (project record)

Plan no. 20264466-T-339 [SOTIF assessment]

Road vehicles—Assessment methods for Safety of the Intended Functionality

《道路车辆 预期功能安全评估方法》

Summary. Planned companion to GB/T 43267-2023; formally assigned 28 Aug 2026 with a 15-month project cycle; currently being drafted.

Official link. SAMR/SAC (project record)

Plan no. 20255462-T-312 [operational-safety supervision platform]

General technical requirements for ICV operational-safety supervision platforms

《智能网联汽车运行安全监管平台通用技术要求》

Summary. Planned national standard for the platforms through which authorities supervise ICV operational safety; currently in public consultation.

Official link. SAMR/SAC (project record)

Plan no. 20255463-T-312 [operational emergency handling]

Technical specification for ICV operational emergency handling

《智能网联汽车运行紧急处置技术规范》

Summary. Planned national standard on emergency handling during ICV operation; currently drafting.

Official link. SAMR/SAC (project record)

Plan no. 20242300-T-348 [AV operation services] (suspended)

Specification for automated driving vehicle operation service

《自动驾驶汽车运营服务规范》

Summary. Planned national standard governing operation services of autonomous vehicles in commercial transport. Plan approved 25 July 2024; current official status is suspended/deferred (暂缓).

Official link. SAMR/SAC (project record search)

Plan nos. 20242298-T-348 and 20242301-T-348 [safety operators] (suspended)

Skill requirements and specifications for training and assessment of autonomous operation vehicle—Part 1: In-vehicle safety officer; Part 2: Remote safety officer

《自动驾驶营运车辆安全员技能要求与培训考核规范 第1部分:车内安全员》《第2部分:远程安全员》

Summary. Planned national standards specifying skill requirements and training/assessment rules for in-vehicle and remote safety operators of autonomous commercial vehicles. Both are suspended/deferred (暂缓).

Official link. SAMR/SAC (Part 1); SAMR/SAC (Part 2)

International Instruments

China is a contracting party to the 1998 Agreement Concerning the Establishing of Global Technical Regulations for Wheeled Vehicles, Equipment and Parts Which Can Be Fitted and/or Be Used on Wheeled Vehicles. It participates in the World Forum for Harmonization of Vehicle Regulations (WP.29) and its Working Party on Automated/Autonomous and Connected Vehicles (GRVA).

An established UN global technical regulation (GTR) does not by itself become a domestic vehicle-compliance rule in China. Under Article 7 of the 1998 Agreement, a contracting party voting in favour of a GTR must submit it to its domestic process for adoption into its laws or regulations and subsequently notify the United Nations of adoption or a decision not to adopt it.

China has now issued a domestic mandatory ADS safety standard, GB 44721-2026, that MIIT says keeps its core technical requirements coordinated with the ADS GTR while adding more detailed requirements adapted to China's road environment and regulatory system. Issuance of the domestic standard is distinct from any later formal notification by China under Article 7 of the 1998 Agreement concerning adoption of the GTR into domestic law or regulations.

China is not a contracting party to the 1958 Agreement and therefore has no treaty obligation under that Agreement to apply UN Regulations or recognize approvals issued pursuant to them. This does not prevent China from incorporating or referring to their technical provisions in domestic law or standards.

UN GTR No. 26 — Automated Driving Systems

United Nations Global Technical Regulation on Automated Driving Systems (ADS GTR)

《联合国自动驾驶系统全球技术法规》

Summary. The first UN global technical regulation specifically addressing automated driving systems. It was established by consensus vote of the contracting parties represented and voting in the Executive Committee of the 1998 Agreement (WP.29/AC.3) during WP.29's 199th session on 24 June 2026. In parallel, the Administrative Committee of the 1958 Agreement (WP.29/AC.1) adopted a new UN Regulation on automated driving systems, assigned UN Regulation No. 185.

UNECE now expressly confirms that GRVA adopted the accompanying Guidance and Interpretation Document (GID) on ADS implementation during its 26th session in Geneva (14-18 Sept 2026). The adopted text is GRVA-26-09/Rev.1, submitted by the GRVA Workshops on Automated Driving Systems to supersede the earlier formal proposal ECE/TRANS/WP.29/GRVA/2026/24. The GID accompanies UN GTR No. 26 and UN Regulation No. 185 and provides guidance for interpretation and implementation of their automated-driving-system requirements.

At the same session, GRVA extended the IWG on ADS2 for three years, agreed to establish workshops on implementation of the ADS instruments, and established the Task Force on Exchange of Scenario-Relevant Information (ESRI), which will incorporate the DSSAD activities. These steps move the UN ADS work from initial rulemaking into implementation, interpretation, continuing technical development, and post-deployment/data-related work.

Chinese participation. China has held a GRVA vice-chairmanship since February 2019. It co-chaired the earlier informal working group on Functional Requirements for Automated and Autonomous Vehicles (FRAV) and, according to MIIT, served as a co-chair country of the ADS informal working group through more than twenty sessions over more than two years of drafting. MIIT organized participation by CATARC and CAICT; hosted multiple ADS meetings and workshops; led work on technical background, drafting principles, and technical rationale; convened a national expert group on the GTR; and contributed closed-course, public-road, vehicle-road-coordination testing, validation, and real-vehicle application data.

Relationship to domestic standards. The formal report of GRVA's January 2026 session records China as stating that its corresponding national regulation was based on the draft GTR but contained additional and more detailed provisions adapted to China's national regulatory system. MIIT's 4 Aug 2026 interpretation states that GB 44721 retains coordination with the GTR's core technical requirements while adding more detailed L3/L4 requirements, user information and training provisions, and a unified standardized test-scenario system tailored to China's road environment and regulatory needs.

Official link. UNECE (GRVA recent activities and September 2026 decisions); UNECE (1998 Agreement / UN GTR materials); MIIT (Chinese domestic implementation materials and GB 44721-2026 interpretation)